Frame Size

17.5”

Type

Downhill Bike

Brand

Diamondback

Vintage Diamondback DBR XTS Moto Downhill MTB Fully custom built from frame up. New parts will be indicated, used parts are checked to be within spec, cleaned, and lubed. Bike as seen weighs approx 44 lbs. It's a downhill bike and is built burly. Measurements (approx):Size: Medium (17.5", center of BB to center to top tube) Stand over: 32" (when rear travel set to 5.25" as seen in pictures) Top Tube Length: 22" BB height: 14 1/2" from ground uncompressed Wheelbase: 45" For full description for this listing. I couldnʼt fit it. Search the title on Craigslist or eBay. Condition Disclosure: Frame up Build with new and cleaned and overhauled parts. There will be some scratches, chips and dents that may or may not be visible in the pictures. There is a dent on the left side of the down tube from the fork bump stop. The stop has been relocated so it does not contact that same spot anymore, otherwise, it is fine. The saddle has bent rails and can be used or replaced by buyer. There is now a 65mm dropper post installed . A longer seat post will be required for taller riders that want a higher seating position and then possibly cut down again to clear the rear shock if necessary. There are some scratches on the inner side of the left stanchion. There is a small clunk on the lower eyelet of the rear shock. Probably needs a new bushing. I have not replaced it yet, the bolt is fine.

Wheel Size

26”

Frame Material

Aluminum