MPX Oil Catch Can For SRT4

If you own a 2003-2005 Neon SRT-4, more than likely you've noticed spots of oil under your car from oil dripping out of your pressure piping between the intercooler and throttle body. If you want to stop this from happening, you need an MPx catch can. The MPx catch can is a device used to trap the oil vapors that flow through the PCV valve or hosing coming off the valve cover. This oil, not trapped, will coat the inside of all of the piping, intake manifold, and causes oil losses, and even horsepower losses due to your motor burning oil instead of pure air. When we began to think about designing a catch can, we wanted it to have lots of useful, but cool features. We designed in the following features: Each can is built small (2.5 inches in diameter, and 5.5 inches tall) so its compact, but yet has enough storage space for collected oil. Each can can comes as a complete kit with bracket, 3 feet of black silicone hosing, and all necessary fittings for installation. Each can has a industrial grade ball valve to allow for easy draining without removing the catch can. Each can is anodized in NINJA black for stealthy good looks. Each can is tested before shipment to ensure there are NO leaks. Each can is lined with a one piece stainless steel mesh that helps trap the oil as the vapors pass through the catch can. The bracket is designed so that you can easily rotate the inlet and outlet of the catch can for easier installation of the lines to PCV. This catch can can be installed in multiple areas in your engine bay, however we highly recommend installing it off the factory battery tray, or the bracket off of the core support near the radiator fans. All of these locations have a threaded bolt that comes installed from the factory that you can easily mount the catch can to. Comes as pictured with no hose.