SSL AWS 900 24 Channel Recording And Mixing Console With DAW Control

Model

AWS 900

Type

Mixing and Recording Console

Brand

SSL Solid State Logic

This console was used in an education setting and has been partially tested to power on and take analog signal through its I/0. The console has 24 channels of SSL preamps and DAW control. 8 aux sends and all the bells and whistles you would expect from SSL. This is sold as is. REVERT Revert can be used to toggle quickly between the current Mix Pass, and a previous Mix Pass. This allows the user to audition between two Mix Passes quickly, while the song is playing, helping selection of the best mix. TRIM Trim mode allows you to update fader data from a previous mix pass, by using the fader to add or subtract level to/from existing moves. It achieves this by setting up a 'null' fader position and then any subsequent moves trim the existing data by the amount of positive or negative change from the null position. If using in Motors Off mode, this increase/decrease can be made before dropping into Trim via the fader status switch, allowing for quick punch ins and outs of level change. Trim data must be merged with the absolute Mix Pass it affects before additional trims can be written. FADER LINKS Fader links allow the user to group faders, cuts, solos and fader status switches without the complications of master/slave style grouping systems. These links can be suspended individually or globally. MATCH 'N' PLAY CUT data is stored regardless of the current fader status, unless the channel safe mode is enabled. Cut automation is updated using the Match 'n' Play method. Match followed by the CUT switch drops the channel into write without changing the current state of the channel CUT. Play followed by the CUT switch returns the channel to replaying the automation data. The CUT switches have momentary action so that instead of flipping the state of the CUT function, it toggles the Automation read/write state. COPY AND SWAP Copy and Swap are used to duplicate or interchange mix data between channels with ease. Simply select the function required then the source and destination channels via the status keys.