The perfect all-around machine for tackling your everyday jobs. You worked hard for your special piece of land. You continue to put everything you can into it because that's the way you do things. That’s why we built the Massey Ferguson® GC1700 Series tractors. For more than 170 years, MF made tractors for people like you—tractors that are strong and versatile and built to handle a wide variety of conditions and applications. On your land, there’s always something to be tended to, even when everything is perfect. The Massey Ferguson GC1715 is a 4WD sub-compact utility tractor from the GC1700 series. This tractor has been manufactured by Iseki for Massey Ferguson since 2013. The MF GC1715 is equipped with a 1.1 L (68.5 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears. The Massey Ferguson GC1715 sub-compact utility tractor used the Iseki engine. It is a 1.1 L, 1,123 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 25 PS (18.3 KW; 25 HP) at 3,000 rpm of horsepower and 19.9 PS (14.6 KW; 19.6 HP) of PTO output power. The MF GC1715 is equipped with hydrostatic power steering, wet disc type brakes, two-post ROPS, and 25.0 liters (6.6 US gal.; 5.5 Imp. gal) fuel tank. MASSEY FERGUSON GC1715 SPECIFICATIONS General Specifications Model Massey Ferguson GC1715 Length 2,470 mm (97.2 in) Width 1,200 mm (47.2 in) Height 1,840 mm (72.4 in) Wheel base 1,450 mm (57.1 in) Ground clearance 170 mm (6.7 in) Weight 650 kg (1,433 lbs) Fuel tank capacity 25.0 liters (6.6 US gal.; 5.5 Imp. gal) Battery 12V Cabin type Two-post ROPS Engine Engine model Iseki Engine type Four-stroke, liquid-cooled, inline Cylinders 3 Fuel type Diesel Displacement 1.1 L, 1,123 cm2, (68.5 cu·in) Bore and stroke – Horsepower 25 (18.3 KW; 24.5 HP) at 3,000 rpm Starter Electric Transmission and chassis Chassis 4×4 MFWD 4WD Steering type Hydrostatic power Brakes Wet disc type Transmission model – Transmission type Hydrostatic Gears Infinite (2-range) forward and reverse Speed Forward: 14.6 kmh (9.1 mph) Tires Front tires Ag: 18×8.50-10 Rear tires Ag: 26×12.00-12 Three-Point Hitch Caterogy I Control type – Lift capacity (at ends) 540 kg (1,190 lbs) PTO (Power take-off shaft) Middle PTO type Independent Middle PTO speed 2,000 rpm Rear PTO type Independent Rear PTO speed 540 rpm Hydraulic system Hydraulic type Open center SCV pump flow 4.8 gpm (18.2 lpm) Steering flow 2.0 gpm (7.6 lpm) Total flow 6.8 gpm (25.7 lpm)