1kg Siraya Tech Tenacious 3D Printer Flexible 405nm Resin

This clear resin is meant to be mixed with the regular resin to add toughness and prevent models from breaking when dropped. It has 1200 5-star reviews on amazon so it clearly works great for that purpose. It sells for $46 per kg. I am selling it cheap because I have way too much of it and has already expired. Normally expired resin needs much longer exposures with loss of detail, but fortunately this will work just fine when mixed with fresh resin in the 12-33% ratio that is recommended. I have been using this recently and it works fine. Alone the resin does not expose as easily as new resin on the flashlight test (makes sense as the photo initiators are the most unstable part of the witches brew that is UV resin). However, when I tested it 50-50% with fresh resin it did not change the exposure compared to fresh resin. This is a worst-case test, so there should be no issues at the 12-33% people normally use. Hopefully it can be used in your models instead of going to waste.

Condition

New

Brand

Siraya Tech