Onkyo 135W network 3-Zone HDMI THX 7.2 receiver

Onkyo TX-NR807 135W network 3-Zone HDMI THX 7.2 receiver I have them connected with Speakers. You may test it out before buying. Highlights: It’s hard to find an audiophile receiver in great condition. This receiver has high-current amplifier design and can power three zones. Product info: 135 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD THX Select2 Plus certification THX listening modes for optimized surround sound at any listening level Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS-HD High Resolution Audio, THX Surround EX®, Dolby Digital EX, DTS-ES™, Pro Logic® IIx, Pro Logic® IIz, and DTS Neo:6 decoding Three-room/three-source output: powered and line-level stereo audio output for 2nd room (using powered 2nd room stereo output allows 5.1 home theater in main room) powered and line-level stereo audio output for 3rd room (using powered 3rd room stereo output allows 3.1 home theater in main room) RIHD (Remote Interactive over HDMI) control via HDMI with compatible components (HDMI-CEC) back surround speaker channels re-assignable for bi-amping front left and right speakers 192kHz/24-bit Burr-Brown digital-to-analog converters for all channels Direct/Pure Audio modes for better stereo sound high-current amplifier design on-screen display for easier system setup and operation DLNA certified for better compatibility with other certified networking components Connections: 1080p-compatible HDMI switching: 6 in, 1 out 1080p video upconversion with Faroudja DCDi Cinema Enhancement for all non-HD sources HDMI version 1.3a with support for Deep Color, x.v.Color, auto lip-sync, DVD-Audio, SACD, multichannel PCM, and HDMI-CEC component video switching (2 in, 1 out) component video conversion (composite to S-video, or composite and S-video to component) digital audio inputs: 3 optical (including 1 front panel), 3 coaxial 5 audio/video inputs, including: 1 front-panel input with composite video 4 rear-panel inputs with composite and S-video 3 audio-only inputs (including phono) 7.2-channel analog audio preamp output Ethernet port for music and JPEG streaming from a wired PC network RS-232 port for automated control systems detachable power cord 1 pair of main speaker outputs Audyssey Laboratories' MultEQ six-point auto setup and room calibration system Audyssey DSX processing for enhanced surround sound height and width effects using additional front speakers Audyssey Dynamic EQ™ for fuller sound at lower listening levels Audyssey Dynamic Volume™ mode to keep listening levels steady learning/multibrand remote 17-1/8"W x 7-13/16"H x 17-3/4"D weight: 40 lbs.

Condition

Used (normal wear)

Model

TX-NR807

Brand

Onkyo