VectorNav VN200

Model

VN200

Brand

VectorNav

The VectorNav VN‑200 is a high-performance GNSS‑aided inertial navigation system (INS) combining MEMS inertial sensors and a GNSS receiver to deliver precise orientation, position, and velocity data in a compact package. --- ✨ Key Features & Specs 310-0Attitude accuracy (dynamic): — Heading: 0.05–0.2° RMS — Pitch/Roll: 0.03° RMS Gyro bias stability: Typical 0.6°/hr (ins) or 5°/hr (GNSS-only) Accel bias stability: < 0.04 mg (< 10 µg spec) Ranges: ±16 g (accel), ±2000°/s (gyro) GNSS: 72‑channel GPS, Galileo, SBAS (+- typically 1 m horiz. accuracy) Data rates: 800 Hz IMU; 400 Hz navigation data; 500 mW power Size & weight: SMD: 24×22×3 mm, 4 g Rugged: 36×33×9.5 mm, 16 g --- 🛠️ Packaging Options 1. **SMD (surface‑mount)** Ultra-compact (like a postage stamp) Requires own interface electronics Ideal for embedded use 2. Rugged enclosure Machined aluminum housing Locking 10-pin Harwin connector + MMCX antenna port Plug-and-play for UAVs, robotics, etc. Development kits for both versions include evaluation board, cables, antenna, software, and documentation — ~$3,100–3,500 . --- 🎯 Common Applications UAV and drone navigation Camera/stabilization systems (EO/IR, LIDAR) SATCOM-on-the-move, robotics, surveying Platforms where SWaP (size, weight, power) matters --- 🔧 Interface & Integration Communicates via ASCII, NMEA‑0183, or VectorNav binary protocols Interfaces: UART (TTL or RS‑232), SPI, Sync‑In/Out for time alignment Typical power input: 3.3–5.5 V (SMD), 3.3–17 V (Rugged) Fully supported by VectorNav Control Center GUI and SDKs (C++, .NET, Python, MATLAB, etc.) --- ✅ Why Choose VN‑200? First-of-its-kind compact GNSS+INS system Excellent dynamic performance in harsh conditions Low SWaP and ITAR-free Tens of thousands fielded since 2012 --- 🔍 Next Steps & Buying Info Datasheet & User Manual available on VectorNav’s site Development kits include evaluation hardware and software Sold directly by VectorNav or through global dealers; fully supported --- 🗣️ Recommendation Use SMD for embedded designs with custom hardware Choose Rugged for ready-to-use deployments needing durability Get the development kit first to test capabilities before full integration --- Need help with protocol commands, wiring diagrams, vendor contacts, or integration into your system (e.g., PX4, ROS)? Just say the word!