Grizzly - 24” Drum sander

Power Source

Corded electric

Type

Sander

Brand

Grizzly

Grizzly G1066Z $2500.00 OR BEST OFFER Can discuss delivery G1066Z 24" 5 HP Drum Sander with VS Perfect sanding results in a fraction of the time. The G1066Z features dual 6" aluminum sanding drums allow a coarse and fine sanding in one pass doubling the efficiency of a single drum sander so allowing you to work faster and be more productive. The variable-speed feed from 0 to 20 feet per minute allows you to find the perfect feed rate for your sanding project. The G1066Z accepts large materials, up to 4" thicknesses and 23-1/2" wide. Wired to run on 220V, the 5 HP has all the power you will ever need to continuously sand large surfaces. Customers have asked us why our drums are not rubber coated. The rubber-coated drums become "spongy" and do not sand evenly or parallel to the ends. For your convenience, the G1066Z has an easy access control panel and built-in amp meter to gauge workload. To keep the dust to a minimum, two 4" dust ports have been added for easy hook-up to a collection system. The sandpaper length needed is 3" wide by 176" long. For a full range of replacement paper for the G1066R, shop here. Like all Grizzly drum sanders, the G1066Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G1066Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Sanding motor: 5 HP, 220V, single-phase drum, 25A Feed motor: 1/3 HP, 2A Maximum board width: 23-1/2" Minimum board width: 2" Maximum board thickness: 4" Minimum board thickness: 1/8" Minimum board length: 9" Drum surface speed: 2300 FPM Conveyor feed rate: Variable, 0-20 FPM Sanding drum size: 6" Sandpaper type: 3" x 176" hook-and- loop Overall dimensions: 50" W x 37" D x 44-1/2" H Approximate shipping weight: 489 lbs. FEATURES: Industrial-duty rubber conveyor belt Two 4" dust ports for easy hook-up to a collection system Variable-speed conveyor V-belt main motor; chain drive feed motor Dual 6" aluminum sanding drums Four leadscrew table elevation system State-of-the-art computer balanced drums Easy-access control panel with amp load meter External micro adjustment on outfeed drum