Dell USB

Brand

Dell

Box of 50 Dell USB Dell - USB 3.0 Type-B (Male) to Type-A (Male) - 5Gbps - 1.8M Cable. Same as photo. Cable is 'Opened - Never Used', with original factory sleeve present. As per the fourth (4th) / last photo; each cable comes with a free opened - never used 200 mm velco cable tie. Pulled from new Dell monitor / display packages. There is some variation in model numbers / part numbers from the photos, however all cables are an identical build to that photographed. PLEASE NOTE: One end of the cable has a 'USB 3.0 Type-B (Male)' connector. This connector can easily be confused with other USB versions and types that are very similar in name or appearance. Please ensure you are selecting the correct USB version and type for your device prior to purchasing. This cable cannot be connected to its USB 2.0 predecessor  'USB 2.0 Type-B (Female)' without the use of a relevant adapter (not included). - This cable is 'bidirectional' meaning it can send or receive data in either direction. As per USB 3.0 standards, this cable can support power transmission up to 5v, 900 mA (0.9A) and capable of a facilitating a maximum bitrate of 5 Gbp/s equivalent to 625 MB/s. The 'USB 3.0 Type-A' connector is fully backwards and forwards compatible with USB type-A ports pertaining to standards 1.0, 1.1 and 3.0. Compatibility with USB 3.1 / 4.0 (USB-C) can be achieved via use of appropriate 'USB 3.0 Type-A (female) to USB 3.1 / 4.0 Type-C (male)' adapter (not included). Please ensure socket compatibility with connecting or receiving devices prior to purchase.  - This maximum bitrate of 5 Gbit/s (625 MB/s) can only be achieved if the transmitting device, receiving device and all USB components in the connecting chain are of the USB standard 3.0 or greater and additionally; providing that the data output of the internal operational functions of the transmitting device are equivalent to or capable of functioning at 5 Gbit/s. Further, power supply of up to 5v, 900 mA (0.9A) can only be achieved if the USB hub, internal USB bus or power supplying device is capable of providing power at 5v, 900 mA (0.9A). Keep in mind that when multiple USB devices are operating off the same power source; supplying hardware may attenuate bandwidth and / or power to accommodate an increased load requirements.