Onkyo TX-NR906 THX® Ultra2 Plus home theater receiver with HDMI switching and upconversion

Product Info: 145 watts x 7 into 8 ohms (20-20,000 Hz) at 0.05% THD THX® Ultra2 Plus certification new THX listening modes for optimized surround sound at any listening level Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio, THX Surround EX®, Dolby® Digital EX, DTS-ES™, Pro Logic® IIx, and DTS Neo:6 decoding analog-to-HDMI video upconversion (up to 1080p) with Silicon Optix Reon-VX HQV™ video processing built-in HD Radio™ tuner for receiving digitally transmitted AM and FM radio broadcasts XM Satellite Radio Ready (requires XM subscription and optional XM Mini-Tuner package) Neural™-THX Surround decoder for XM's HD Surround channels and gaming SIRIUS satellite radio capable (requires SIRIUS subscription and optional SiriusConnect™ home tuner kit) iPod® integration (requires optional DS-A2x iPod dock) Audyssey Laboratories' MultEQ® XT eight-point auto setup and room calibration system (microphone included) Audyssey Dynamic EQ for fuller sound at lower listening levels Audyssey Dynamic Volume mode keeps listening levels steady to avoid overly loud peaks such as on TV commercials three-room/three-source output: powered and line-level stereo audio output for 2nd room (using powered 2nd room stereo output allows 5.1 home theater in main room) composite video output for 2nd room line-level stereo audio output for 3rd room RIHD (Remote Interactive over HDMI) control via HDMI with compatible components (HDMI-CEC) 192kHz/24-bit Burr Brown digital-to-analog converters for all channels high-current amplifier design with massive toroidal transformer and independent power supplies for audio and video processing back surround speaker channels re-assignable for bi-amping front left and right speakers back-surround and front channel speaker outputs bridgeable for higher power to front speakers (minimum 8-ohm speakers required) learning/multibrand remote 17-1/8"W x 7-5/8"H x 19-1/8"D Connections: 1080p-compatible HDMI digital video switching (4 in, 2 out) HDMI version 1.3a with support for Deep Color, x.v.Color, auto lip-sync, DVD-Audio, SACD, and HDMI-CEC 1080p video upconversion with Silicon Optix Reon-VX HQV™ video processing for all non-HD sources (upconverted video available through HDMI output only) component video switching (3 in, 1 out) component video conversion digital audio inputs: 3 optical (including 1 front panel), 3 coaxial digital audio outputs: 1 optical 6 audio/video inputs, including: 1 front-panel input with composite and S-video 5 rear-panel inputs with composite and S-video 3 audio-only inputs (including phono) 7.1-channel analog audio preamp input 7.1-channel analog audio preamp output Ethernet port for music streaming from a PC network front-panel USB port for audio playback from USB flash drives and portable USB music players RS-232 port for automated control systems 1 pair of main speaker outputs detachable power cord MFR # TXNR906 Item # 580TXN906B Features 7.1 Channel Amplifier: The Onkyo TX-NR906 features a 145 watt x 7-channel amplifier (measured with two channels driven) into 8-ohms at 20 to 20,000 Hz with a maximum total harmonic distortion of 0.05%. WRAT (Wide Range Amplifier Technology): This technology uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. High Quality Transformers: The Onkyo TX-NR906 features a massive Toroidal transformer plus 2 separate transformers for audio and video processing. Digital-to-Analog Converters (DACs): To decode and playback high-resolution recordings, this receiver is equipped with Burr-Brown 192kHz/24-bit DACs for all channels. Vector Linear Shaping Circuitry (VLSC): Conventional D/A conversion methods reduce digital pulse noise at the conversion stage but can't remove it completely. Previously only found on Onkyo's high-end components, VLSC (Vector Linear Shaping Circuitry) employs a unique D/A conversion circuit to overcome this problem. Data is converted between sampling points and these points are joined with analog vectors in real-time to produce a smooth output wave form. The result is a virtually noiseless, smooth analog signal based on the digital source to bring out even the most subtle of nuances in your music, movie soundtracks and even MP3s. Speaker Impedance: There is a menu adjustment for minimum speaker impedance; options are 6Ω (for speakers 6 to 16-ohms) and 4Ω (for speakers 4 or 5-ohms). Multi-Language On-Screen Display (OSD): An OSD can be displayed on your television for easy system setup. The joystick/enter button on the remote makes display navigation and setting adjustment simple and convenient. The setup OSD is passed through all the monitor outputs (composite video, S-video, component video, and HDMI). You can select a 4:3 or 16:9 aspect ratio for the monitor output so the menu is displayed properly to match your TV's screen. You can choose from several languages for the receiver's on-

Condition

Used (normal wear)

Features

Headphone jack, 14-band equalizer, Line-in jack, Line-out jack, X-pressive equalizer, USB port

Signal Type

Digital audio broadcasting

Model

TX-NR906

Brand

Onkyo

Playable Media

Digital media player, CD, DVD