Up for sale is A Evinrude 90HP outboard, model E90MLCLD 2 stroke motor. It's compression is 125 to 135 PSI on every single cylinder. (See picture) The propeller is in good shape. The gear is lube is clean and shows no signs of water. (not milky) The gears in the lower unit are working, forward, neutral and reverse. The carbs were soaked and rebuilt with new gaskets. The block was rebuilt 8 years ago. It's also complete, all parts are there including the controls, keys, wiring, propeller and cables. The charging system and timing are working great. (keep in mind timing should always be redone after it's installed on a new boat) It has new, spark plugs & Sierra spark plug cables, the propeller is new I only used it twice. It also has a hydrofoil and a panther stainless steel skeg. It is a manual tilt, not electric. The shaft is a long shaft which is 20in. This is a VRO model however the oil mixing feature has been disconnected. I also made a recent video of the motor running the link will be https://offerup.com/redirect/?o=YmVsb3cuSGVyZQ== is the link. https://offerup.com/redirect/?o=aHR0cHM6Ly95b3V0dS5iZS9yNWhaS0IxUmNyOA== Whenever I sell a motor to a customer I like to take a moment out to do compression test, spark test, and test the charging system . I also turn it on and let the customer listen to it run. This is so they could see it is working at the time of purchase