Eide outboard boat motor carrier for pickup truck

This thing is so cool. I sold my outboard motor and so I no longer need it. If you have an outboard motor weighing up to 150 pounds, this thing is a must. I built a wood frame that connects to the D-rings in my truck bed that I will include if you want it, but you can also bolt it into the truck bed if you want. Saves your back and protects your motor. I made a video of myself operating it here {url removed}. I still have the original manual and installation guide. How It Works - The outboard motor is securely anchored to the motor carrier. Release the shaft holder bungee, remove safety hitch pin and slide the motor out past the tailgate. - Re-install the safety hitch pin to lock the motor in position. Place the outboard motor in the “shallow tilt” position, lift the shaft end of the motor out of the shaft holder until the motor locks into position. - Remove the swivel lock hitch pin, rotate the outboard motor 180 degrees, reinstall the hitch pin to lock the motor carrier swivel in place. The motor is ready to place on your boat! - Release the outboard motor from the “shallow tilt” position and lower the motor. This position can be used to flush or service the motor. - Boom: 42” extruded aluminum - Mounting Track: 36” extruded Transom : 1 1/2" X 9 1/2" x 10 3/8" with Swivel Ball Bearing : 8 Shipping Weight : 26lbs