TASCAM DA-30 Professional DAT Recorder/Player with Remote

TASCAM DA-30 Professional DAT Recorder/Player. Working. Has issues: REWIND NO WORK. Comes with Remote control. Description HIDE This DAT recroder is USED. Please see photos for condition and appearance. It shows cosmetic wear and tear from normal use over the years. It has been tested and is functioning properly. The Tascam DA-30 provides all the connectivity imaginable in a professional application on both analog and digital environments. SCMS code can be overridden. Enhanced transport controls. - Digital audio interface conforming to AES/EBU standards. - 3 sampling rates supported: 32 kHz, 44.1 kHz, and 48 kHz. - Balanced +4 dBm analog inputs/outputs for professional connections - Individual A/D and D/A converters for the L and R channels using the latest converter technology (64x oversampling Delta-Sigma A/D, 8x oversampling 18 bit D/A) - Mountable in a 19" EIA rack - Wired-remote controls - I/O port (parallel, as distinct from serial) for the DA-30 to be controlled from edit controllers or other external units - MARGIN display digitally shows in dB the available headroom before distortion occurs - Standby mode for automatic PAUSEs at Start IDs - Variety of Start and Skip ID editing capabilities (positioning within 5 frames, automatic ID recording, program renumbering and others) - Digital copy from digital sources ("Copy Prohibited" or not) possible (but third generation copying of that copy prohibited) Tape Speed: 8.5 mm/sec, (12.225 mm/sec.) Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP) Sampling Rate: Recording: 48 kHz/44.1 (digital, analog input); 32 kHz (digital input only) Frequency Response: 20 Hz - 20 kHz +/- .5dB 9SP) 20 HZ - 14.5 kHz +/- .5dB (LP) Signal to Noise Ratio: Better than 92 db Dynamic Range: Better than 93 db Total Harmonic Distortion: 0.004% at 1 kHz (SP) .07% at 1 kHz (LP) Channel Separation: Better than 85 db (at 1 kHz) Wow and Flutter: Unmeasurable (less than 0.001%) Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm Analog Output: (XLR) balanced, +4 dBm/10k ohm, (RCA) unbalanced, -10 dBV (+6 dBV max) / 430 ohm; Output Level: 100mW or more (8-ohm load) Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm) Digital I/O: (XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub 15-pin (female

Condition

Used (normal wear)