Aerogenics Acura TL-S Brembo Hubcentric Big Brake Kit Adapters With Front Rotors for 2006-2015 Honda Civic Si Coupe/Sedan FG2 FA5 FG4 FB6

I have a set of Aerogenics TL-S adapters for the Acura TL Brembo Caliper swap for an 8th/9th gen civic si. I also have a set of 2007 Acura TL Type S front drilled/slotted rotors that had the hub bored to 3.005” to accommodate the adapter to be hubcentric on the 9th gen civic si (2012-2015) and the 8th gen civic si (2006-2011). 64.1mm is the oem hub bore size. You will need extended wheel studs if you’re going to run the adapter and rotor. I will sell both as a set or if you only need the adapter I can separate it. I’m trying to get rid of them as a set preferably, which will also be easier for you than to source/machine your own TL rotors. With this setup, you can bolt on the OEM Acura TL 4 piston Brembo caliper on your civic si after drilling the steering knuckle caliper mounting holes. This adapter goes on the hub behind the rotor, which lines the rotor up to the brembo caliper. It makes the rotor hub-centric so your wheel is safely installed to the hub. I will also throw in the Honda OEM Caliper mounting fasteners (bolts) for the oem brembo calipers which will fit once you drill out your knuckles on your civic. FIRM ON PRICE $280 for the entire set (2 rotors/2 adapters) (Aerogenics set comes with regular rotors, not d/s) $170 for the 2 adapters only **if post still up, items are still available**

Condition

New

Placement On Vehicle

Front Wheel

Brand

Aerogenics

Fitment Type

2006-2015 Honda Civic Si Coupe (FG2/FG4) or Si Sedan (FA5/FB6)