Gage Pins .011” To .250”

Price includes both sets as pictured. Note one set is minus and one plus. A gage pin set with pins ranging from .011" to .250" is a precision measuring tool used for checking hole sizes, depths, and distances between holes, as well as setting other measuring devices like micrometers. Key Features and Specifications Increments: The pins usually increase in size in increments of 0.001". Length: Each pin is generally 2 inches long. Material: They are commonly made from durable 52100 bearing steel, heat-treated to a hardness of 60-62 Rockwell C for longevity. Packaging: case Tolerance Types: Plus vs. Minus Gage pin sets are generally available in "plus" or "minus" tolerance series: Plus Tolerance (Go Gages): These are on the high side of the nominal size (e.g., +.0002"/-.0000"). They are primarily used as "Go" gages for checking if a hole is large enough to accept the pin, ensuring the actual hole size is within the upper limit of the acceptable range. Minus Tolerance (No-Go Gages): These are on the low side of the nominal size (e.g., +.0000"/-.0002"). They are useful as "No-Go" gages to check if a hole is too small, ensuring the actual hole size is not below the lower limit of the acceptable range. Mechanic technician inspection inspector gunsmith tool

Condition

Used (normal wear)