Golf Cart Battery Charger

Golf Cart Battery Charger, 15 AMP 48 Volt EZGO TXT & RXV with 3-Pin Delta-Q Plug 48V Golf Cart Charger Features： WARM NOTES : YILEIDE 800W 48 Volt golf cart battery charger is suitable for lead-acid batteries of golf carts, as charging other batteries may cause battery damage. 15AMP GOLF CART CHARGER : Charges 48 volt EZGO RXV & TXT golf carts. Plug and forget 7-stage smart charging technology. Our 800W golf cart battery charger with an IP67 weather resistance rating, you do not have to worry about your charger being damaged by water, dust or vibration. EXTENDED POWER CABLES : YILEIDE 48 volt golf cart battery charger 16ft of reach leaves plenty of room to avoid the struggle of parking right next to an outlet or dangerously adding extension cords,The handle is easily to take with you. Our replace golf cart charger is made of aluminum alloy shell that is heat-resistant, cold-resistant. OBC DETECTION：If your current charger isn't working and suspect the OBC may be faulty, you may want to purchase our Onboard battery Charger instead that will connect directly to the batteries and charge your cart regardless of a faulty OBC. INTELLIGENT PROTECTION FUNCTION : Input low-voltage & over-voltage protection /Overheat protection charger /Output empty-load protection/Output short/reverse protection /Output over-current/over-volage protection /Automatic shutdown when fully charged. Specifictions: Nominal DC output voltage 48V Maximum DC output current 15A Maximum DC output power 800W Battery Type: Lead-acid AC input voltage range: 85-260 VAC Nominal AC input voltage: 100-240 VAC Nominal AC input frequency: 50 / 60 Hz Power factor: >0.9 Input Current：10A Size: 7.3 x 6.6 x 3.9 inch Net Weight: 3.7 lbs Cooling: Active cooling with fan Enclosure Protection Level: IP67 Humidity: 5% － 95% To allow the heat generated by the charger to be discharged out of the car smoothly, all vents should be unblocked and the space should not be sealed. There should be enough space near the charger to ensure ventilation and dust prevention, and to prevent dust from accumulating on the surface and affecting the heat dissipation effect. The charger is not allowed to be disassembled. Opening the charger cover at will may cause electric shock or other damage. To avoid damaging the charger harness, do not place objects on the charger harness or where it can be easily carved. If the wiring harness is damaged, replace it immediately. If the AC power source requires an extension cord, please ensure that the extension cord can withstand the maximum input current of the charger, and keep the length of the extension cord within a certain limit to avoid affecting the normal operation of the charger.

Condition

New