AC A/C Compressor For Jeep Liberty 2006-2008 Dodge Nitro 2007-2008 3.7L CO10900C

FITMENT: for Nitro 2007-2008 for Liberty 2006-2008 Technical Parameters: Oil Type:PAG 46, Internal Oil Content：130, Refrigerant:R-134A, Pulley Grooves 6, Pulley Diameter (mm):130, Compressor Type HS18 Part Number -Replace CO 10900C、CO-10900C、CO10900C、68184、67184、‎1010900、1110900、1210900、(contact info removed)0AB、(contact info removed)0AD、(contact info removed)0AE、(contact info removed)6AD、RL111400AE、RL111406AD、638971、638973、17658、(contact info removed)、(contact info removed)、(contact info removed)、(contact info removed)、(contact info removed)、 (contact info removed)R、140256C、140256NC、17670、10360630、10360631、(contact info removed)0AA、(contact info removed)0AC、(contact info removed)6AC、(contact info removed)6AB、(contact info removed)6AA、R5111400AG、C1747R、0610177、TEM275521、275521、TEM255275、(contact info removed)、(contact info removed)AM、R5111400AE、R5111400AF、R5111400AG Kit Includes: 1x A/C Compressor W/Clutch REMOVING THE OLD COMPRESSOR 1. Open the hood of the vehicle and locate the A/C Compressor. 2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped). 3. Evacuate the A/C system using a refrigerant recovery machine. 4. Disconnect the negative battery cable. 5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned. 6. Disconnect any electrical connectors from the A/C Compressor. 7. Remove the AC Connections. Remove the A/C Compressor mounting bolts. 8. Remove the A/C Compressor from the vehicle. INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR 1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. 2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed. Flush evaporators from inlet to outlet. Flush condensers from outlet to inlet.