T&A Receiver

Per your request, here are the key specs and a current value estimate for the T+A SR 1535 R (PULSAR) 7.1 surround receiver: Power & Amp Stage • 150 W/ch @ 4 Ω, 110 W/ch @ 8 Ω (5 internal channels; provisions for 7.1) • Peak per channel: 250 W (4 Ω) / 170 W (8 Ω) • Damping factor: >500; Slew rate: 60 V/µs • Power supply reservoir: 50,000 µF Pre/DAC • Preamp FR: 1 Hz – 400 kHz; THD: 0.002%; S/N: 107 dB • Converters: A/D 24-bit/48 kHz; D/A 24-bit/192 kHz I/O • Digital in: 3× coax + 3× optical (one front) • Analog in: 3× high-level + MM phono (auto calibration) • Multichannel in: 7.1 (Cinch) • Outputs: analog record out, digital record (1× optical, 2× coax), pre-outs, dual sub outs (+ SC-Link), back-channel outputs, Active Speaker Out Formats • Dolby Digital/EX, DTS/ES/ES Discrete, Pro Logic II/IIx, DTS Neo:6, Dolby Headphone Video • Composite: 7 in; S-Video: 6 in; Component (YUV): 4 in • Video up/down conversion; 2 monitor outs (one with component) Tuner • Sensitivity (mono/stereo): 1.3 / 40 µV • S/N (stereo/mono): 70 / 75 dB; THD: 0.15% / 0.10% • RDS, wide/narrow IF, attenuator Other • Direct Analogue Stereo mode; separate analog/digital PSUs; auto speaker calibration; 2-zone; 3 trigger outs • Dimensions (H×W×D): 15 × 44 × 39 cm; Weight: 18 kg • Mains: 115/230 V, 50/60 Hz; Max consumption: 600 VA Value (used, working, good condition): about $700–$1,200 (typical around ~$900),

Condition

Used (normal wear)