Epax x1 3d printer

Was a gift and never got around to learing how to use it and not interested in learing now beand new never been used only taken out the box to take pics. EPAX X1 3D PRINTER FEATURES: 3.5-inch Color TFT Touchscreen.2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD capable of capturing very fine detail.Improved Z axis stability.40W High Energy 50 LED light source.Pre-installed non-FEP film (Imported from Japan) to allow easier detachment. FEP film can be used as well but the specially formulated nFEP is superior.Sanded build platform surface made with premium soft aluminum for better adhesion than cheaper, hard aluminum.Anti-Aliasing supported and enabled in installed firmware.Wide selection of resin options; can use any 405nm wavelength 3D printing resin.115mm (L) *65mm (W) *155mm (H) build volumeXY resolution reaches 0.047mm;  Minimal Z layer height is 0.01mm   Each printer purchase includes: 1x spare Non-FEP film, 0.125mm thick 1x USB stick loaded with manual PDF file, a sample print file and a ChiTuBox config file1x power adapter 1x plastic scraper tool 1x metal scraper tool1x allen wrench2x resin filters   ADVANTAGES OVER SIMILAR PRINTERS: - No Z-Wobble - The EPAX X1 has an upgraded Z-axis carriage rail. It uses a double steel rod reinforced carriage and steel bearings. No calibration is required. It runs perfectly out of the box. - Non-FEP Film for Resin Vat - Reduces print adhesion between print and film. Better air permeability than FEP films. Our high-quality non-FEP film can be used on LCD, DLP and SLA printers!  Standard FEP film is compatible with our printers as well. - Better Light Source - EPAX uses 50W rated 5x10 LED array light source and can last longer than others. Unlike others which use weak 25W light source.  We tuned it down to 40W to extend the lifespan of the LCD masking screen. - Ultra-Precise Fixed Build Platform - The EPAX X1 uses a 4-point mount that is rock solid and will be leveled out of the box. It will rarely...