ABX Welding Machine, MMA-160A 110/220V Welder Machine,Portable Stick Welder IGBT Digital Display LCD, Home DIY Arc Welder, Mini Welder With Dust Cover

New , never used ABX Welding Machine, MMA-160A 110/220V Welder Machine,Portable Stick Welder IGBT Digital Display LCD, Home DIY Arc Welder, Mini Welder With Dust Cover (Grey) Top highlights 【MMA WELDER】The MMA 160 MIG Can handle 6013/7018 electrode. Maximum Current is 160 Amps. MMA Stick can use 6013/7018 welding rods. This design enables the MMA welder to work seamlessly in different power environments, providing greater convenience and applicability. Adjustable hot start and arc force, is easy to strike, provides smoother welding.Automatic anti-stick avoids electrode sticking in the puddle, suitable for mild steel, cast iron, stainless steel as well as hard surfacing 【110/220V DUAL VOLTAGE】The MMA welder supports 110/220V dual voltage and displays it clearly through the front panel indicator light. 110V: Rod (contact info removed)18, Max Size 1/8"(3.2mm), Optimum max 3/32"(2.5mm),Lower currents, reduce circuit breaker tripping. Adjust welding current as needed after test welds. (32A circuit breaker recommend. If 20A breaker, Please DON't take full welding output, pls set digital display< 115,use max 3/32"(2.5mm) rod) 220V: Rod 6013, Max Electrode rod Size 5/32"(4.0mm), Rod 7018,Max Electrode rod Size 1/8"(3.2mm) 【COLLABORATIVE CONTROL】The MMA welder adopts IGBT let both beginners and professionals use it. Built-in overcurrent protection, overload protection, overheating and overvoltage functions can extend the service life of the machine. Note: Do not turn on the power until the screen is turned off and the fan stops 【PACKAGE INCLUDES】 1×MMA 160 Welder Machine, 1×3meters 300a Welding Tongs, 1×2meters 300a Grounding Clamp, 1×Steel Brush, 1×5 Meters Measuring Tape, 1×Plastic Box, 1× User Manual 【NOTICE】 If you are a skilled welder, you can try using an E6010/E6011 cellulose electrode temporarily. Verify that the Power Switch is in the OFF position, into outlet rated to at least 20 amps to limit nuisance circuit breaker tripping. The equipment must be powered by an independent electrical network of adequate capacity, in order to guarantee its good performance. Check if the sockets, power board and protectors (circuit breakers and fuses) support the equipment