Denon POA-1500 Amplifier

Denon POA-1500 Amplifier Unit has been serviced with a number of items: - Cleaned/disinfected inside and out - Side wood panels buffed and polished - New rhodium plated/carbon fiber 5 way speaker binding posts with custom 3D printed bracket - New speaker relays - Denon service MDK 15001 lighting fix - All new(10) display bulbs with blue covers behind the meters - Two 1000uf/80v capacitors on power supply board replaced with 1000uf/100v - Idle current set to 15mV - Neutral point set - Both meters adjusted/calibrated This is the one you want, the one you’ve been looking for. Amp sound wonderful, zero issues. Big power supply filter cap test within 5% still and low ESR and vloss. Small capacitors on main left and right board measure within around 12% with low ESR and vloss. Really no need to recap the unit for quite some time. The blue covers over the display bulbs behind the meters can be removed very simply to give it the factory look - see pictures. I can do this prior to shipping if desired. The Denon MDK 15001 service fix was issued by Denon to fix the issue with the display bulbs burning out prematurely. Resistors R101, R102 and transistors TR 35, TR 36 are replaced with new components of different values. The new display bulbs should last a lifetime now. The two capacitors on the power supply board were replaced as they are known to fail and thus were upgraded to a higher voltage spec.