1448 jon boat, I don't know the make or model. Rebuilt the transom, has removeable casting deck, main floor is carpeted plywood with 2" foam panel between support ribs. 1984 15 hp Johnson 2 stroke, ran last year I think it just needs a $16 fuel pump and a carb clean, 6 gallon fuel cell. Also comes with a Minn Kota Endura 40 transom mount motor, and a mounting block for a bow mount motor. Trailer is a custom built harbor freight trailer with a 2x3x12 foot tongue. It is set up to run 2 kayaks or the Jon boat on 3" pvc bunks, has 2" ball reciever. $29000 obo, buy all or items individually. Cannot sell the trailer separately until the boat sells. Full transparency... The trailer is in great shape, I ran it to potholes and back many times with 2 kayaks loaded down on it that weighed more than this boat. The boat could use some paint. When I redid the transom I discovered a small hairline crack in the floor just beneath the transom bracket, it didn't leak because the guy that had it before me had sealer on it. I was going to cut a piece of aluminum (which I can give you) and 3M 5200 the plate down to seal it and add some extra support, then replace bottom transom bolts to cinch it all up. It's an older boat so the aluminum is thicker than the newer jon boats and its a 1448, which are harder to find and usually double the price of a 1436. She has some dings and a small dent up front but she is solid. The longer I have it, the more work I will probably do to it and with that the price will probably go up.