AO SEPT PLUS Ideal for silicone hydrogel lenses Deep Cleaning for Comfort that Lasts

SAFETY INFORMATION, PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. INCORRECT CONTACT LENS CARE CAN CAUSE SERIOUS PROBLEMS WITH THE EYES. AOSEPT** PLUS lens care system for the deaning, disinfection, neutralisation, protein removal and storage of all types of contact lenses including silicone hydrogels. The AOSEPT PLUS system consists of: the AOSEPT PLUS deansing and disinfecting solution (see picture 1) and the AOSEPT PLUS lens case (see picture 2). The AOSEPT PLUS lens case consists of a transparent cup and a connected unit of screw cap, lens holders (baskets) and the AODISC** neutraliser catalyst attached at the bottom. Ensure the AODISC is attached before use as it is essential for the neutralisation of the hydrogen peroxide. AOSEPT PLUS solution and the AOSEPT PLUS lens case must always be used together. The preservative-free, aqueous AOSEPT PLUS solution contains: hydrogen peroxide 3%, phosphonic acid (stabiliser), sodium chloride, phosphate (buffer system), poloxamer (surfactant). STERILE A Processed by aseptic techniques INSTRUCTIONS FOR USE 1. Wash your hands and dry them with a dean towel. 2. Open the lens holder marked "I" and place your left lens on the dome. Close lens holder taking care to avoid trapping your lens. 3. Repeat procedure with your right lens placing it on the dome of the other lens holder marked "R". 4. Open the flip top cap on the AOSEPT PLUS bottle and bend it back and out of the way. 5. Thoroughly rinse the lenses in the lens holders with AOSEPT PLUS for 5 seconds (see picture 3). 6. Fill the cup with AOSEPT PLUS solution to the fill-line. DO NOT UNDERFILL OR OVERFILL (see picture 4). 7. Place lens holder in the AOSEPT PLUS cup and screw closed. Do not shake the cup. 8. Store lens case upright (see picture 5). - If bubbles leak from the hole in the top of the lens case's cap, non-neutralised AOSEPT PLUS solution may be present. Empty the solution from the lens case and wash off any spillage from the surface on which the AOSEPT PLUS lens case was standing. Thoroughly rinse the AOSEPT PLUS cup and lens holder with sterile saline. If spillage occurs, clean up immediately with a paper towel. Wash your hands thoroughly before handling your lenses or touching your eyes. REPEAT THE DISINFECTION PROCEDURE 9. Allow lenses to soak for a minimum of 6 hours (see picture 6) or overnight to neutralise solution. 10. Remove your lenses from lens holder. 11. Your lenses are now ready to wear. 12. Discard used solution, rinse the AOSEPT PLUS cup and lens holder with sterile DO NOT USE TAP WATER OR NON-STERILE WATER 13. Allow them to air-dry by inverting the lens holder outside the cup (see picture 7). 14. If you do not intend to wear your lenses immediately after disinfection/neutralisation, you may store them in the neutralised AOSEPT PLUS solution, in the unopened AOSEPT PLUS lens case for up to 14 days. Disinfect and neutralise every 14 days with fresh solution and before wearing your lenses. If recommended by your eye care professional: - Rinse lenses before insertion with sterile saline.

Condition

New