Grizzly G0602 - 10" x 22" Benchtop Metal Lathe

Brand

Grizzly

Only used once!!! Virtually new G0602 10" x 22" Benchtop Metal Lathe List at Grizzly for $2095 plus $249 for fright. I would possibly part with the custom built rolling bench I built for it. 48”w X 32”d Only reason I selling is I’m out of space and need to clean up . An efficient benchtop machine with a powerful 1 HP motor, and all the features you need for accurate machining on every project! The Grizzly G0602 Benchtop Metal Lathe is the perfect size for garage or workshop at 10" x 22". It features a 25mm spindle bore, 1-3/4"- 8 TPI MT#4 headstock and an 1-1/4" MT#3 tailstock. The 1 HP motor powers the spindle through six speeds from 150-2400 RPM. This lathe comes equipped with a full featured carriage and apron assemblies that provide super accurate cuts and finishes. This Benchtop Metal Lathe will cut only right-hand threads. The G0602 includes other exceptional equipment you’ll need to get up and running including: the hardened and precision-ground V-ways, 5" 3-Jaw chuck with two sets of jaws, 6-1/2" 4-jaw chuck with reversible jaws, 8" faceplate and 4-way tool post. The G0602 manual was written by our U.S.-based Documentation Department is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your lathe. SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 13.6A Swing over bed: 9-1/2" Swing over cross slide: 6-1/8" Swing over saddle: 6-1/8" Distance between centers: 22" Bed width: 6-1/8" Spindle bore: 25mm Spindle speeds: 6, 150–2400 RPM Spindle type: Threaded, 1-3/4" x 8 TPI Spindle taper: MT#4 Tailstock taper: MT#3 Tailstock quill travel: 2-1/2" Cross slide travel: 6-1/2" Compound travel: 3-1/2" Maximum tool bit size: 1/2" Leadscrew: 3/4" x 12 TPI Longitudinal feeds: (9) 0.0025, 0.0140 in./rev. Inch thread range: (31) 8–72 TPI Metric thread range: (26) 0.25–3.50mm Footprint: 12-1/2" x 47-1/2" Overall dimensions: 46" W x 22" D x 16-5/8" H Approximate shipping weight: 432 lbs. FEATURES: Hardened and ground V-ways Thread dial Spindle reversing switch Inch/metric dials Emergency stop button Quick-locking tailstock Enclosed oil-bath gearbox Chip tray and backsplash guard 1-year limited warranty INCLUDES: 5" 3-Jaw scroll chuck with two sets of jaws 6-1/2" 4-Jaw independent chuck with reversible jaws 8" Faceplate 4-Way turret tool post MT#3 dead center MT#4 dead center Set of change gears Follow rest Steady rest Bottle for oil Tool box with service tools