Bench source neck flame Annealer

Made in the USA! Like new Bench Source case neck flame annealing machine. This machine has been used 5 times. It has the original manual, standard torch tip, power cord, annealer, standard case plate, and 50 BMG case plate. If you need additional details or pictures, please let me know. This is the best flame annealer that you can purchase! The following information is provided from the Bench Source website: 1) You may use one or two heat sources. Not necessary to perfectly setup two nozzles because the cartridge case spins in a stationary spindle while heating. 2) Torch tips are adjustable in height, angle, distance and vertical tilt by two clamp knobs. (No Wing Nuts) Sets up in 2 minutes from 22 Hornet to the Largest Magnum Cases. (Can be supplied for .50 Caliber) 3) Time of heating is adjustable fom 1.5 to 10.0 seconds. Precise control is supplied by micro-processor unit and 10 bit analog/digital converter. Processor has both a 'Setup' (manual) control and 'Automatic Cycle'. 4) Table Top and Index Plate are made from aluminum and are fan cooled by a 50 Cubic Feet per Minute Fan Unit.. They will not heat up significantly during use! No plastic to bow or warp. Table acts as a heat sink to maintain hardness in the cartridge case head. 5) Index Plate is fixed and indexed by what is termed by mechanical types as a Geneva Drive. The wheel is always engaged and will not free wheel, possibly binding and over loading motors or having to make sure of the position of the wheel before operation. 6) Small foot print. Only 10" Wide x 12" Long x 6" Tall. (Excluding Capstands) Weighs approximately 12 pounds. Great size for portability. 7) Supplied with a built in level and (4) adjustable legs. (Unit only needs to be moderately level). The Drive Wheel thickness is 1/4" eliminating cartridge tip over. 8) All aluminum is anodized either Black or Clear to prevent oxidation over time and has a very pleasing look. (Your friends will be impressed!) 9) Will process about 500-600 cartridges per hour. Average time is 4 seconds for heating and 2 seconds for indexing on most .308 and Magnum case sizes. (Can be progammed up to 10 seconds heating time for single torch use) 10) Lifetime warranty on materials and workmanship. Does not cover normal wear & tear. Electronics & Motors are limited to 2 years.

Condition

Used (normal wear)